# Well documented GridBot v2 build **URL:** \ **Category:** GridBot\ **Created:** [July 9, 2020, 2:20pm UTC](https://forum.grid.space/t/well-documented-gridbot-v2-build/23 "2020-07-09T14:20:56Z")\ **Posts on this page:** 1\ **Showing post:** 10
**Author:** ![jeffeb3](https://forum.grid.space/user_avatar/forum.grid.space/jeffeb3/32/7_2.png) [@jeffeb3](https://forum.grid.space/u/jeffeb3)\ **Post date:** [September 21, 2020, 9:10am UTC](https://forum.grid.space/t/well-documented-gridbot-v2-build/23/10 "2020-09-21T09:10:19Z")
![IMG_20200919_214308](https://forum.grid.space/uploads/default/original/1X/365c1ce47601dffaf783bb41121327a40ff89e9d.jpeg) ![IMG_20200918_164401](https://forum.grid.space/uploads/default/original/1X/1000c3b1ed398b7b614fb461003c3dadac55fc5c.jpeg) The first part attaches to your existing bearing mount. It hugs the extruder and fits between the extruder and motor. The bl touch needs to be about 7mm lower, so I just printed a spacer. The part fan and cooling fan both attach to the v6 heatsink. I do plan on releasing these files. The extruder mount was designed by a friend and I haven’t gotten good testing in yet. So I don’t want to release them until I have some decent results. It has to be assembled in order and it is a little tricky getting the screws for the extruder in. It is really hard to photograph 🙂 --- _[View the full topic](https://forum.grid.space/t/well-documented-gridbot-v2-build/23)._