# Q: Stepover for tapered ball mills

**URL:** <https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226>\
**Category:** CAM\
**Created:** [April 5, 2024, 7:41am UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226 "2024-04-05T07:41:12Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![popcornawh](https://forum.grid.space/letter_avatar_proxy/v4/letter/p/bc79bd/32.png) [@popcornawh](https://forum.grid.space/u/popcornawh)\
**Post date:** [April 5, 2024, 7:41am UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226/1 "2024-04-05T07:41:12Z")

</div>

I use several tapered ball mills for 3D carvings.  
When setting up the actual geometry the stepover used in the toolpath is based on the flute diameter (for mostly equal to the shaft).  
To get a correct stepover, would it not be better to be based on the tip (if not zero)?  
Haven’t tried it yet, but I think the same applies to v-bits with a not-zero tip…

![image](https://forum.grid.space/uploads/default/original/2X/0/061035b5640aa85cff5f821d335444b9394838fa.png)

---

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [May 14, 2024, 9:54pm UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226/3 "2024-05-14T21:54:57Z")

</div>

tapered ball mills are not yet supported, though it has been requested

---

<div class="post-metadata">

**Author:** ![elbabilonio](https://forum.grid.space/user_avatar/forum.grid.space/elbabilonio/32/1934_2.png) [@elbabilonio](https://forum.grid.space/u/elbabilonio)\
**Post date:** [July 14, 2024, 2:08pm UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226/4 "2024-07-14T14:08:08Z")

</div>

Can you elaborate? The option appears in the drop-down menu or has this feature been added since your comment?

---

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [July 14, 2024, 6:48pm UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226/5 "2024-07-14T18:48:51Z")

</div>

there is “end”, “ball”, and “taper”, but not “taper ball” which is a different animal

---

<div class="post-metadata">

**Author:** ![Sean\_True](https://forum.grid.space/user_avatar/forum.grid.space/sean_true/32/2480_2.png) [@Sean\_True](https://forum.grid.space/u/Sean_True)\
**Post date:** [July 2, 2025, 8:54pm UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226/6 "2025-07-02T20:54:42Z")

</div>

If we want/need to use such a tool, what would you recommend as the best aproximation?

---

<div class="post-metadata">

**Author:** ![BakedPotatoLord](https://forum.grid.space/user_avatar/forum.grid.space/bakedpotatolord/32/2199_2.png) [@BakedPotatoLord](https://forum.grid.space/u/BakedPotatoLord)\
**Post date:** [July 2, 2025, 10:58pm UTC](https://forum.grid.space/t/q-stepover-for-tapered-ball-mills/1226/7 "2025-07-02T22:58:53Z")

</div>

I would probably use a ball mill, ignoring the tapered part of the mill. Regardless, there might be some edge cases where this won’t work.
