Back again after a slight detour chasing down errors that I thought might be an issue, such as out of date installations of Octoprint.
First was I totally messed up my rPi 1B installation for the Creality in updating and upgrading everything. Then when I went to update and upgrade my rPi 3b+ with latest Octoprint and that kept failing. So I did a fresh install of Octopi on each of these to get to a neutral platform that I know should not put any obstacles in like out of date Python or something.
Another side issue from redoing the rPi 3b+ was that I got a strange error message that I couldn’t add any plugins, that the system was throttled down. Arg. So I went through logs and discover that I have been getting undervoltage errors and that system has been down throttling. That was why I always had issue getting wifi to work on the board. So I learned about power requirements. Weird that this was with the original Canakit power plug that should be delivering enough. Not sure why. So I found a USB wall wart that can do 3 amps and got the shortest micro USB cable I had and now no low voltage errors.
So both systems are back in action and running Octoprint fine. All systems updated and functioning.
Now back to the task at hand. I loaded the GridSlpace plugin: crickets!
Octoprint setup with name/title:
Octoprint Plugin Screen:
Octoprint setup popup:
Octoprint export popup:
Octoprint hotkey c check:
Setup popup in Onshape:
Export popup in Onshape:
hotkey C to display local targets:
I’m stumped here. I am expecting that after installing the GridSpace plugin for Octoprint for my Prusa, I should be able to find that printer as a target to export to from the Kiri:Moto instance app window I have in Onshape with no further installs or tweaking.
Am I missing something obvious. I’m sorry to be a bother.
any logs I can check?