# Large Scale Laser Slicing - Multiple DXFs **URL:** \ **Category:** Laser\ **Created:** [November 7, 2023, 5:14pm UTC](https://forum.grid.space/t/large-scale-laser-slicing-multiple-dxfs/1067 "2023-11-07T17:14:44Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![GAB](https://forum.grid.space/user_avatar/forum.grid.space/gab/32/1655_2.png) [@GAB](https://forum.grid.space/u/GAB)\ **Post date:** [November 7, 2023, 5:14pm UTC](https://forum.grid.space/t/large-scale-laser-slicing-multiple-dxfs/1067/1 "2023-11-07T17:14:44Z")
Howdy, straight to the point I’m making an object whose slices won’t all fit onto my Snapmaker’s cutting bed (400mm x 400mm). The object itself fits the bounds as it’s ~300x300 in area, but when I slice it into ~16 layers obviously I can only cut 1 layer at a time. This is fine, but unfortunately grid.space insists on outputting a single, giant DXF. I’m coming from Slicer for Fusion 360 and it outputs multiple DXFs but it has its own shortcomings. Am I missing something or is there no way to kick out 1 DXF per layer? No optimization needed, just that 1 feature as-is. ---
**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\ **Post date:** [November 13, 2023, 1:22am UTC](https://forum.grid.space/t/large-scale-laser-slicing-multiple-dxfs/1067/2 "2023-11-13T01:22:09Z")
At the moment, there is no way to have it generate separate layer output. but it’s a good feature request. ---
**Author:** ![rikon](https://forum.grid.space/letter_avatar_proxy/v4/letter/r/ce7236/32.png) [@rikon](https://forum.grid.space/u/rikon)\ **Post date:** [November 18, 2023, 12:26am UTC](https://forum.grid.space/t/large-scale-laser-slicing-multiple-dxfs/1067/3 "2023-11-18T00:26:06Z")
> [@GAB](#): > > t a time. This is fine, but unfortunately grid.space insists on outputting a single, giant DXF. I’m coming from Slicer for Fusion 360 and it outputs multiple DXFs but it has its own shortcomings. Just found Kiri Moto tonight from a post in Lightburn forum. Amazing job, Stewart! I hope to be able to make some use of it once I figure it out some more.