# Direct Drive Extruder Modification

**URL:** <https://forum.grid.space/t/direct-drive-extruder-modification/88>\
**Category:** GridBot\
**Created:** [September 29, 2020, 10:48pm UTC](https://forum.grid.space/t/direct-drive-extruder-modification/88 "2020-09-29T22:48:52Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [October 8, 2020, 1:10pm UTC](https://forum.grid.space/t/direct-drive-extruder-modification/88/13 "2020-10-08T13:10:11Z")

</div>

I’ve made a version 2 of this as a single piece with a few other modifications. Here is the [STL](https://static.grid.space/stl/gb2-direct-drive-mount-2.stl).

 ![Screen Shot 2020-10-08 at 9.07.00 AM](https://forum.grid.space/uploads/default/original/1X/434b0ea8fabfbc7c965132c8a1d477bda01db114.jpeg)

---

_[View the full topic](https://forum.grid.space/t/direct-drive-extruder-modification/88)._
