# Contour axes reversed?

**URL:** <https://forum.grid.space/t/contour-axes-reversed/164>\
**Category:** Kiri:Moto\
**Created:** [November 29, 2020, 11:54pm UTC](https://forum.grid.space/t/contour-axes-reversed/164 "2020-11-29T23:54:52Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jsiddall](https://forum.grid.space/letter_avatar_proxy/v4/letter/j/e495f1/32.png) [@jsiddall](https://forum.grid.space/u/jsiddall)\
**Post date:** [November 29, 2020, 11:54pm UTC](https://forum.grid.space/t/contour-axes-reversed/164/1 "2020-11-29T23:54:52Z")

</div>

I selected X pass contour but what I ended up with were passes along the Y axis. I interpreted X pass as passes along the X axis but maybe that isn’t what was intended.

---

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [November 30, 2020, 12:01am UTC](https://forum.grid.space/t/contour-axes-reversed/164/2 "2020-11-30T00:01:09Z")

</div>

it’s all relative, I suppose. does contour x mean it cuts along X or progresses (left-to-right) along X? happy to switch this if it’s material.

---

<div class="post-metadata">

**Author:** ![jsiddall](https://forum.grid.space/letter_avatar_proxy/v4/letter/j/e495f1/32.png) [@jsiddall](https://forum.grid.space/u/jsiddall)\
**Post date:** [November 30, 2020, 1:48pm UTC](https://forum.grid.space/t/contour-axes-reversed/164/3 "2020-11-30T13:48:26Z")

</div>

Ah, that makes sense – short moves vs. long moves.

Clearly not a big issue, it just worked opposite of what I expected. At this point I would say wait for other opinions. If I’m the only one that thinks the way I do (not unheard of!) then leave it as is.

Otherwise just reword the description on the checkboxes. Something like changing “Enable X pass” to “Enable cuts parallel to Y” and vice versa.

---

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [November 30, 2020, 4:31pm UTC](https://forum.grid.space/t/contour-axes-reversed/164/4 "2020-11-30T16:31:21Z")

</div>

> [@jsiddall](#):
>
> Otherwise just reword the description on the checkboxes. Something like changing “Enable X pass” to “Enable cuts parallel to Y” and vice versa.

swapped labels for tonight’s `D9` release

---

<div class="post-metadata">

**Author:** ![jsiddall](https://forum.grid.space/letter_avatar_proxy/v4/letter/j/e495f1/32.png) [@jsiddall](https://forum.grid.space/u/jsiddall)\
**Post date:** [December 1, 2020, 2:36am UTC](https://forum.grid.space/t/contour-axes-reversed/164/5 "2020-12-01T02:36:33Z")

</div>

> [@stewart](#):
>
> swapped labels for tonight’s `D9` release

Thanks, looks good!

There is one small “tell” regarding the change: the progress bar still says something like “render Y” when enable X pass is chosen, but that is a non-issue for me.
