# Contour and Filter

**URL:** <https://forum.grid.space/t/contour-and-filter/1102>\
**Category:** Uncategorized\
**Created:** [December 18, 2023, 6:20pm UTC](https://forum.grid.space/t/contour-and-filter/1102 "2023-12-18T18:20:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![enhydra](https://forum.grid.space/user_avatar/forum.grid.space/enhydra/32/1000_2.png) [@enhydra](https://forum.grid.space/u/enhydra)\
**Post date:** [December 18, 2023, 6:20pm UTC](https://forum.grid.space/t/contour-and-filter/1102/1 "2023-12-18T18:20:40Z")

</div>

![Kiri_Brandi](https://forum.grid.space/uploads/default/original/2X/b/bd517c151ac6b87f0f22fd8944ac73e852677fc0.jpeg)

The contour operation generates some strange paths. Can I prevents that by using filters? May I find somewhere informations about them?

But hej, Kiri does it already pretty good. 🙂

[kiri\_brandi.kmz](https://forum.grid.space/uploads/short-url/zBpvxnrD8SxURQ7a4lz3xbx5X94.kmz) (853.0 KB)

---

<div class="post-metadata">

**Author:** ![enhydra](https://forum.grid.space/user_avatar/forum.grid.space/enhydra/32/1000_2.png) [@enhydra](https://forum.grid.space/u/enhydra)\
**Post date:** [December 20, 2023, 12:01pm UTC](https://forum.grid.space/t/contour-and-filter/1102/2 "2023-12-20T12:01:46Z")

</div>

![kiri1](https://forum.grid.space/uploads/default/original/2X/5/5d270d86884ed78c600d045bb04ef44658d5e685.jpeg)

 ![kiri2](https://forum.grid.space/uploads/default/original/2X/6/60b5d4baf01a9804bd3b4676d328952d6b7de3ea.png)

 ![IMG20231220125108](https://forum.grid.space/uploads/default/original/2X/4/4d619769f3e87ad1092c47a53320dd9145bf3513.jpeg)

Found a workaround: I used trace to do a circular coutour. Since the operation first mills the grooves by equal depth, I packed each groove into a trace op. Tons of clicks, but it works with fewer moves between the grooves 😉
