# Carved lines help needed

**URL:** <https://forum.grid.space/t/carved-lines-help-needed/3065>\
**Category:** Kiri:Moto\
**Created:** [September 27, 2026, 5:06pm UTC](https://forum.grid.space/t/carved-lines-help-needed/3065 "2026-09-27T17:06:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kulungele](https://forum.grid.space/user_avatar/forum.grid.space/kulungele/32/2534_2.png) [@kulungele](https://forum.grid.space/u/kulungele)\
**Post date:** [September 27, 2026, 5:06pm UTC](https://forum.grid.space/t/carved-lines-help-needed/3065/1 "2026-09-27T17:06:22Z")

</div>

Hello,

I have the attached outline project, and I want to carve some lines on the house so it looks like:

 ![image](https://forum.grid.space/uploads/default/original/2X/7/7fe17bf93c1806a2ff75f4d49256b97635411c61.jpeg)

I have the different parts ready for outline, but I don’t know how to tell KM that I want these horizontal lines + the vertical ones on the door. It is meant to be on MDF wood 3mm thick, and I want the lines to be 0.5mm deep.

If I draw the lines in the model, they seem to disappear when imported into KM. Any idea about how to include the lines in the project?

Thanks!

---

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [September 29, 2026, 1:39pm UTC](https://forum.grid.space/t/carved-lines-help-needed/3065/2 "2026-09-29T13:39:20Z")

</div>

the easiest way to do this is to model the lines as a V groove. then use trace and select the bottom center of the V

---

<div class="post-metadata">

**Author:** ![kulungele](https://forum.grid.space/user_avatar/forum.grid.space/kulungele/32/2534_2.png) [@kulungele](https://forum.grid.space/u/kulungele)\
**Post date:** [October 1, 2026, 2:36pm UTC](https://forum.grid.space/t/carved-lines-help-needed/3065/3 "2026-10-01T14:36:17Z")

</div>

Thanks Stewart.

The thing is that I am starting with a csv that looks like this:

 ![image](https://forum.grid.space/uploads/default/original/2X/6/627e9c5de5b50d1dcbf6b2be664a2bed1ae8bdb3.png)

When I import it into KM, the lines in the house are gone. My expectation would be that I can import this csv and the lines are kept as objects themselves, even if it is necessary to import the lines on a separate file. I cheated by adding a 90º arch on the sheet origin to keep my 0,0 coordinates steady on the 2 documents, removed the lines from the shapes file and created a new file only with the lines, but importing the lines file does not have the desired effect, and I see no object in KM work area.

Once I have the lines, my idea is to outline the shapes (3mm) and on a different operation trace 1mm the lines with the V-bit.

Thanks for your time!

---

<div class="post-metadata">

**Author:** ![stewart](https://forum.grid.space/user_avatar/forum.grid.space/stewart/32/21_2.png) [@stewart](https://forum.grid.space/u/stewart)\
**Post date:** [October 4, 2026, 5:49pm UTC](https://forum.grid.space/t/carved-lines-help-needed/3065/4 "2026-10-04T17:49:41Z")

</div>

SVGs are extruded into solids by Kiri. Lines that do not form closed polygons cannot be turned into 3D features automatically at present.
