# Site Feedback

**URL:** https://forum.grid.space/c/site-feedback/2.md

[Latest](https://forum.grid.space/latest.md) · [Categories](https://forum.grid.space/categories.md)

---

## [About the Site Feedback category](https://forum.grid.space/t/about-the-site-feedback-category/1)

<div class="topic-metadata">

**Author:** [@system](https://forum.grid.space/u/system)\
**Replies:** 0

</div>

---

## [Align with Y axis](https://forum.grid.space/t/align-with-y-axis/2847)

<div class="topic-metadata">

**Author:** [@meddesign](https://forum.grid.space/u/meddesign)\
**Replies:** 1\
**Last updated:** [November 30, 2025, 2:05am UTC](https://forum.grid.space/t/align-with-y-axis/2847 "2025-11-30T02:05:57Z")

</div>

Seems to me the label should be changed to “Align with X axis” . …..a really small issue that does not really cause me any problems…

---

## [Pick holes one at a time](https://forum.grid.space/t/pick-holes-one-at-a-time/2836)

<div class="topic-metadata">

**Author:** [@meddesign](https://forum.grid.space/u/meddesign)\
**Replies:** 5\
**Last updated:** [November 25, 2025, 7:17pm UTC](https://forum.grid.space/t/pick-holes-one-at-a-time/2836 "2025-11-25T19:17:36Z")

</div>

the cutting this part very slow because of much travel between holes for step down….would be better if I could pick one hole for the rough or outline operation ….do that 4 times and the holes would be done one at a time……