# MSLA

**URL:** https://forum.grid.space/c/kiri-moto/msla/8.md

[Latest](https://forum.grid.space/latest.md) · [Categories](https://forum.grid.space/categories.md)

---

## [About the MSLA category](https://forum.grid.space/t/about-the-msla-category/14)

<div class="topic-metadata">

**Author:** [@stewart](https://forum.grid.space/u/stewart)\
**Replies:** 0

</div>

The category is for the discussion of Kiri:Moto’s MSLA 3D Printing Mode.

---

## [Slicer crashes at early stage (\<10%)](https://forum.grid.space/t/slicer-crashes-at-early-stage-10/3011)

<div class="topic-metadata">

**Author:** [@purwanu](https://forum.grid.space/u/purwanu)\
**Replies:** 9\
**Last updated:** [August 22, 2026, 4:49am UTC](https://forum.grid.space/t/slicer-crashes-at-early-stage-10/3011 "2026-08-22T04:49:49Z")

</div>

I hope I can attach the workspace file. Slicer crashes in a very early stage… ( \<10%) regards, NPu

---

## [SLA Slicer, normal layer exposure time is same as base exposure time](https://forum.grid.space/t/sla-slicer-normal-layer-exposure-time-is-same-as-base-exposure-time/2994)

<div class="topic-metadata">

**Author:** [@purwanu](https://forum.grid.space/u/purwanu)\
**Replies:** 6\
**Last updated:** [May 30, 2026, 5:10am UTC](https://forum.grid.space/t/sla-slicer-normal-layer-exposure-time-is-same-as-base-exposure-time/2994 "2026-05-30T05:10:13Z")

</div>

Hi, First time to use the SLA slicer. I just load a test file, and slice it. Output file has same exposure time for all layer. regards, NPu